Compliance Information; Radio And Tv Interference - Patton electronics SmartNode 4940 Series Quick Start Manual

Multi-port t1/e1/pri enterprise voip media gateway
Hide thumbs Also See for SmartNode 4940 Series:
Table of Contents

Advertisement

B.1 Compliance
EMC Compliance:
FCC Part 15, Class A
EN55022, Class A
EN55024
Safety Compliance:
UL60950-1/CSA C22.2 No. 60950-1
IEC/EN 60950-1
AS/NZS 60950-1
PSTN Regulatory Compliance:
FCC Part 68
CS-03
AS/ACIF S016
AS/ACIF S038
AS/ACIF S043 (G.SHDSL card)
NZ ISDN Layer 3 Supplement
B.2 Radio and TV interference
The SmartNode router generates and uses radio frequency energy, and if not installed and used properly—that
is, in strict accordance with the manufacturer's instructions—may cause interference to radio and television
reception. The SmartNode router have been tested and found to comply with the limits for a Class A computing
device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide rea-
sonable protection from such interference in a commercial installation. However, there is no guarantee that
interference will not occur in a particular installation. If the SmartNode router does cause interference to radio or
television reception, which can be determined by disconnecting the unit, the user is encouraged to try to correct
the interference by one or more of the following measures: moving the computing equipment away from the
receiver, re-orienting the receiving antenna and/or plugging the receiving equipment into a different AC outlet
(such that the computing equipment and receiver are on different branches).
SmartNode 4940 Series Quick Start Guide
B.0 Compliance Information
7

Advertisement

Table of Contents
loading

Table of Contents