Samsung SyncMaster 400MX User Manual page 94
Lcd monitor
Hide thumbs
Also See for SyncMaster 400MX:
- User manual (205 pages) ,
- Quick start manual (22 pages) ,
- Control protocol (90 pages)
Table of Contents
Advertisement
•
The server program's Power-On option works only if the LCD Display's power is com-
pletely shut off.
Please make sure not to use the Power-On option when the LCD Display is in the process
of shutting down since this may cause system errors on the LCD Display.
•
In the OSD image of MagicInfo, Network mode is the same as Device.
•
When using MagicInfo with the MagicInfo Pro Server Program: perform Network mode.
•
When using MagicInfo with the device directly connected to LCD Display : execute Device
mode.
•
Press ALT + F12 to directly go to the MagicInfo Window screen.
•
To setup MagicInfo on a Windows screen, a keyboard and mouse are required.
•
To setup MagicInfo on a Windows screen, refer to the MagicInfo Server Help.
It is highly recommended not to turn off the AC power during an operation.
•
For pivoted LCD Displays, ticker transparency is not supported.
•
For pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for
movies.
•
For drive D:, EWF is not applied.
•
When the contents of Setup have been changed when EWF is in the Enable state, to save
the changes in the disk, you must Commit them.
•
By selecting Disable, Enable or Commit, the system is restarted.
MagicInfo
Adjusting the LCD Display
Advertisement
Table of Contents
Troubleshooting
