Samsung SyncMaster 400MX User Manual page 13

Introduction
Using a DVI Cable (DVI-D to DVI-D) - DVI
mode (Digital PC)
DC OUT [5V/1.5A]
Connect this to the power connector of a TV tuner box or network box.
Make sure to use connecting DC-OUT terminal to the authorized TV-Tuner Box
[SBB-DT*].
Otherwise, this may result in damage to the product.
AV IN [VIDEO] (VIDEO Connection Terminal)
Connect the [ VIDEO ] terminal of your monitor to the video output terminal of
the external device using a VIDEO cable.
AV AUDIO IN [L-AUDIO-R](LCD Display Audio Connection
Terminal (Input))
AV AUDIO OUT [L-AUDIO-R] (LCD Display Audio Connection
Terminal (Output))
RGB OUT
(Applicable to the MXn model only)
LAN (LAN Connection Terminal)
(Applicable to the MXn model only)
USB(USB Connection Terminal)
Keyboard / Mouse, Mass Storage Device
Compatible.
(Applicable to the MXn model only)
Note
The number of LCD Displays that can be
connected to loopout may differ depending
on the cables, signal source etc. With cables
where there is no degradation or signal
source, up to ten LCD Displays can be con-
nected.