Samsung 400MX-2 Quick Start Manual

40" 400mx-2 lcd professional display
Hide thumbs Also See for 400MX-2:

Advertisement

Quick Links

LCD DISPLAY

quick start guide

400MX-3, 460MX-3, 400FP-3, 460FP-3


Advertisement

Table of Contents
loading

Summary of Contents for Samsung 400MX-2

  • Page 1: Lcd Display

    LCD DISPLAY quick start guide 400MX-3, 460MX-3, 400FP-3, 460FP-3...
  • Page 2: Package Contents

    Introduction Package Contents Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by holding the grooves on both sides of the package box. Note • After unpacking the package, make sure to check the contents of the package.
  • Page 3 Manuals Quick Setup Guide (Not available in all loca- Cables Power Cord Others Remote Control Batteries (AAA X 2) (BP59-00138B) (Not available in all loca- Sold separately Semi Stand KIT RGB to BNC Cable RGB to COMPONENT Ca- Introduction Warranty Card User's Guide tions) D-Sub Cable...
  • Page 4: Your Lcd Display

    Sold separately Wall Mount KIT Your LCD Display The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. Front MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu.
  • Page 5 D.MENU button Opens the on-screen D.MENU. Note The D.MENU button is activated when a TV tuner is connected and otherwise, the PIP button is enabled. PIP button Push the PIP button to turn the PIP screen On / Off. Power button [ Use this button for turning the LCD Display on and off.
  • Page 6 Introduction POWER S/W ON [ │ ] / OFF Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. RGB/COMPONENT IN (PC/COMPONENT Connection Terminal (Input)) • Connect the [RGB/COMPONENT IN] port on the monitor to the RGB port on the PC us- ing the D-SUB cable.
  • Page 7: Audio Out

    LCD Display to the HDMI terminal of your digital output de- vice using a HDMI cable. • Up to HDMI 1.3 can be supported. Note To use MagicInfo, the network box specified separately by Samsung must be installed inside...
  • Page 8 [HDMI IN 2 (MAGICINFO)] terminal. For more information on how to purchase and in- stall a network box, contact Samsung Electronics. RJ 45 MDC (MDC PORT) MDC(Multiple Display Control) Program Port Connect the LAN cable to [RJ45 MDC] on the product and LAN on the PC.
  • Page 9 Introduction • • Connecting a Network Box (sold separately) MagicInfo video output port This is the output terminal for the video, audio, and control signals of MagicInfo. It can be used by connecting it to the [HDMI IN 2 (MAGICINFO)] terminal using an HDMI cable. Connects to a LAN cable to allow Internet or net- work access in MagicInfo mode.
  • Page 10: Remote Control

    Note • See the "Connections" section for details about cable connections. • The power switches of both of the monitor and the network box must be turned on for the network box to operate normally. Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequency.
  • Page 11 POWER Number Buttons / GUIDE button + VOL - SOURCE D.MENU TOOLS Up-Down Left-Right but- tons INFO The Color button and the PC/DVI/HDMI/DP selection button. Introduction MENU RETURN EXIT MagicInfo Turns the product On/Off. Turns the product Off. Used to enter the password during the OSD adjustment or to use MagicInfo.
  • Page 12 Introduction You can select the PC, DVI, HDMI or DP(DisplayPort) external input directly in a mode other than TV mode. TV channels provide written information services via teletext. TTX/MIX - Teletext Buttons Note This function does not work for this LCD Display. MTS- MTS/DUAL You can select MTS (Multichannel Television Stereo) mode.
  • Page 13 Introduction Returns to the previous menu. RETURN Exits from the menu screen. EXIT MagicInfo Quick Launch Button. MagicInfo Note Enabled when a Network box is connected.
  • Page 14: Connecting A Computer

    Connections Connecting a Computer The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. There are several ways to connect the computer to the monitor. Choose one from the following options.
  • Page 15: Connecting To Other Devices

    Connect the power cord for your LCD Display to the POWER port on the back of the LCD Display. Turn on the power switch. Note Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices Note •...
  • Page 16: Connecting Av Devices

    Connecting AV Devices Connect an audio cable to [AV/COMPONENT AUDIO IN [L-AUDIO-R]] on the product and the audio port on an external device such as a VCR or DVD player. Connect a video cable to [AV IN] on the product and the video output port on the external device.
  • Page 17: Connecting Using A Hdmi Cable

    Press SOURCE on the product or remote control and select "AV". Then, start the Camcorders with a tape inserted. Note The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Connecting Using a HDMI Cable Connect an HDMI cable to [HDMI IN 2 (MAGICINFO)] or [HDMI IN 1] on the product and the HDMI output port on a digital device.
  • Page 18: Connecting Using A Dvi To Hdmi Cable

    Connecting Using a DVI to HDMI Cable Connect a DVI-HDMI cable to [HDMI IN 2 (MAGICINFO)] or [HDMI IN 1] and the DVI output port on the digital device. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and connect the op- posite jack to the [RGB/DVI/DP/HDMI AUDIO IN] terminal of the LCD Display.
  • Page 19: Connecting A Dtv Set Top (Cable/Satellite) Box

    Note • Press SOURCE on the product or remote control and select "Component". • Then, start the DVD Player with a DVD disc inserted. • A RGB to component cable is optional. • For an explanation of Component video, consult your DVD manual. Connecting a DTV Set Top (Cable/Satellite) Box Connect a RGB to Component cable between the [RGB/COMPONENT IN] port on the LCD Display and the P...
  • Page 20: Connecting To An Audio System

    • Network boxes are sold separately. • For more information on how to purchase and install a network box, contact Samsung Electronics. Connecting the Power Connect the [POWER] terminal of the product and the [POWER] terminal of the installed network box using a power extension cable.
  • Page 21: Connecting To Magicinfo Out

    Connecting to MAGICINFO OUT Connect the [MAGICINFO OUT] terminal of the network box and the [HDMI IN 2 (MAGICINFO)] terminal of the monitor using the HDMI cable. Connecting a LAN Cable Connect the LAN cable between the [LAN] port on the product and the [LAN] port on your PC. Connections...
  • Page 22: Connecting A Usb Devices

    Connections Connecting a USB devices You can connect USB devices such as a mouse or keyboard.
  • Page 23: Troubleshooting

    Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check Turn off both your computer and the LCD Display. Unplug the video cable from the back of the computer. Turn on the LCD Display.
  • Page 24: Symptoms And Recommended Actions

    2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel). Symptoms and recommended Actions Note A LCD Display recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the LCD Display to become blank, have poor Coloring, become noisy, etc.
  • Page 25: Problems Related To The Screen

    Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. The screen is blank and the power indicator is off. Ensure that the power cord is firmly connected and the LCD Display is on.
  • Page 26: Problems Related To Audio

    Adjust the Color Control option in the OSD adjustment menu. The Color image is distorted by dark shadows. Adjust the Color Control option in the OSD adjustment menu. The Color white is poor. Adjust the Color Control option in the OSD adjustment menu. The Power Indicator blinks.
  • Page 27 Q & A How can I change the frequency? The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) How can I adjust the resolution? Windows XP: Set the resolution in the Control Panel →...

Table of Contents