LG LDF9810ST Service Manual page 10

�
STEAM OPTION INDICATOR
�
Indicates that the STEAM option has been selected. The symbol will blink while
steam is being injected into the dishwasher.
RINSE INDICATOR
It shows configuration of rinse option.
The (
�
The symbol blinks during the cycle if the sanitary temperature has been achieved.
Once the cycle has ended, the symbol will be steady if the sanitary temperature has
been achieved. (See NOTE below.)
The (
SPRAY INDICATOR
�
Indicates the selected spray intensity: Strong (
HALF LOAD INDICATOR
Each press of the HALF LOAD key cycles between upper rack only and lower rack
�
only.
When DUAL INTENSITY is selected, both lights will be and one will be blinking. The
spray intensity for the blinking rack can be adjusted independently.
CHILD LOCK
This symbol will be visible when Child Lock is activated.
�
RINSE AID
The symbol will be activated when the rinse aid needs to be refilled
TIME REMAINING
Indicates normal run time for the cycle selected.
�
During the cycle, the estimated time remaining for the selected cycle will be
displayed
To cancel a running cycle, open the door, then press and hold the STEAM
CANCEL
DELICATE and NORMAL buttons together for 3 seconds.
The drain pump will be activated and the cycle will be canceled.
To lock/unlock the buttons, press SPRAY and RINSE simultaneously for 3 seconds.
CHILD LOCK
When CHILD LOCK is set, the CHILD LOCK indicator will appear and all buttons are
disabled.
� � � �
INDICATOR
) symbol indicates that sanitary rinse has been selected.
) symbol indicates that an extra rinse has been added to the selected cycle.
CANCEL & CHILD LOCK
- 9 -
�
), Medium ( ) or Soft ( ).