Using Slide Show; Using The Child Lock Function - Kenmore 41002 Use & Care Manual

Using Slide Show
When Slide Show is selected, it shows the slides that are
saved in an electronic photo album. See page 33 for
instructions on setting up a slide show. If slides are not
selected from the photo album, the screen will show a
Kenmore Elite
TM
default slide.
1. Press the Slide Show button.
Home l
Ii
Child
Accent
Lock Lighting 1
.0';,3, C
Ii II
Water I
.
NOTE: The sliding photos option can be selected at
"Photo Album."
Press the Exit button to stop the slide show and
return to the "Home" screen.
Using the Child Lock Function
Activate the child lock function by pressing and holding
the Child Lock button for more than 3 seconds. All control
panel buttons, the touch-screen controls, and the
dispenser will be deactivated. To reactivate the control
buttons, the touch-screen controls, and the dispenser,
press and hold the Child Lock button for more than
3 seconds.
1. Press and hold the Child Lock button for more than
3 seconds.
_i__ II*_
i Slide
Show
Accenf J
Lighting
.
_)_ i11_ s,,,s,_,_,_ _< _,,,
The "Child Lock Activated" message will be displayed
and the lock icon will show up in the upper-right
corner.
- Based on the photo size, there could be black
background around the photo.
-The photo is automatically optimized for a 16:9
wide-screen format.
NOTE: Saved images can be
stretched out or reversed. To
use a reversed image,
download it to your PC, flip
the image horizontally, and
then save it before uploading
it to the photo album.
.
Press and hold the Child Lock button for more than
3 seconds to deactivate the child lock function and
reactivate all operating controls. The "Child Lock
Deactivated" message will be displayed and the lock
icon will disappear.
I "
Slide
I Acce.II C'?
I Lightin
1 lceT_ipe_ _ce Type Wore r
19