Freezing The Screen; Temporarily Blanking The Screen - Hitachi CP-X200 CP-X300 Operating Manual

Freezing the screen

1.
Press FREEZE button on the remote control.
The "FREEZE" indication will appear on the screen (however,
the indication will not appear when TURN OFF is selected for
MESSAGE item in SCREEN menu
go into the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal,
press FREEZE button again.
● The projector automatically exits from the FREEZE mode when
one of the projector's buttons or remote control buttons of
STANDBY/ON, SEARCH, COMPUTER, VIDEO, BLANK, AUTO, VOLUME,
MUTE, KEYSTONE, MENU, MAGNIFY and MY BUTTON1/2(except
MY MEMORY or PICTURE MODE is assigned to)
● If the projector continues projecting a still image for a long time, the LCD panel
might possibly be burned in. Do not leave the projector in the FREEZE mode
for too long.

Temporarily blanking the screen

1.
Press BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to BLANK item in SCREEN menu
(36).
To exit from the blank screen and return to the input signal screen,
press BLANK button again.
● The projector automatically returns to the input signal screen
when one of the projector's buttons or the remote control buttons
(except ASPECT, POSITION, MAGNIFY or FREEZE button, also
except MY BUTTON1/2 if AUTO KEYSTONE
PICTURE MODE is assigned to
NOTE • The sound is not connected with the blank screen function.
If necessary, set the volume or mute first.
), and the projector will
(39)
) is pressed.
(42)
is pressed.
(42)
EXECUTE or MY MEMORY or
Operating
FREEZE
COMPUTER
VIDEO SEARCH
ASPECT AUTO BLANK
MAGNIFY
PAGE UP VOLUME
HOME
ON
PAGE DOWN MUTE
END
OFF
FREEZE MY BUTTON KEYSTONE
1 2
MENU
POSITION
ENTER
ESC RESET
BLANK
COMPUTER
VIDEO SEARCH
BLANK
ASPECT AUTO
MAGNIFY
HOME PAGE UP VOLUME
ON
END PAGE DOWN MUTE
OFF
FREEZE MY BUTTON KEYSTONE
1 2
MENU
POSITION
ENTER
RESET
ESC
21