Easy Menu - Hitachi CP-X200 CP-X300 Operating Manual

EASY MENU

EASY MENU
From the EASY MENU, items shown in the table below can
be performed.
Select an item using the ▲/▼ cursor buttons. Then perform
it according to the following table.
Item
ASPECT
AUTO
KEYSTONE
EXECUTE
KEYSTONE
PICTURE MODE
(continued on next page)
24
Using the ◄/► buttons switches the mode for aspect ratio.
See the ASPECT item in IMAGE menu (29).
Using the ► button executes the auto keystone function.
See AUTO KEYSTONE
Using the ◄/► buttons corrects the vertical keystone distortion.
See KEYSTONE
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR
TEMP settings. Choose a suitable mode according to the projected
source.
NORMAL  CINEMA  DYNAMIC  BOARD(BLACK)
DAYTIME  WHITEBOARD  BOARD(GREEN)
NORMAL
CINEMA
DYNAMIC
BOARD(BLACK)
BOARD(GREEN)
WHITEBOARD
DAYTIME
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is "CUSTOM". Please refer to GAMMA (26) and
COLOR TEMP (26) items in PICTURE menu.
• When this function is performed, a certain extra such as a line
may appear.
Description
EXECUTE item in SETUP menu (34).
item in SETUP menu (34).
COLOR TEMP
#2 MID DEFAULT
#3 LOW DEFAULT
#1 HIGH DEFAULT
#4 Hi-BRIGHT-1 DEFAULT #4 DEFAULT
#5 Hi-BRIGHT-2 DEFAULT #4 DEFAULT
#2 MID DEFAULT
#6 Hi-BRIGHT-3 DEFAULT #6 DEFAULT
GAMMA
#1 DEFAULT
#2 DEFAULT
#3 DEFAULT
#5 DEFAULT