Nikon Super Coolscan 900ED User Manual page 37

FH-835M Holder for 35-mm Slides
The FH-835M can be used to scan up to fi ve 35-mm slides with mounts 1.0–3.2 mm
thick. Slide the mounts into place between the guides, short side fi rst and with the
refl ective fi lm base up (the matte emulsion surface down;
contact the base of the clips.
Guides
Inserting Slides
Insert slides between the guides. Forcing the slides onto the guides could damage the
slides or clips and prevent the scanner from focusing correctly. To minimize resistance,
try inserting slides at a slight angle.
Be sure a slide is inserted in the fi rst slot. Leaving the aperture at the left end of the hold-
er uncovered could cause scanning errors or interfere with accurate color reproduction.
Proceed to "Step 3 — Open the Scan Window" (
FH-869S Holder for Medium-Format Film
The FH-869S can be used to scan medium-format
59 × 82 mm electron-microscope fi lm. The length of the fi lm strip that can be inserted in
the holder depends on the type of fi lm:
• 6 × 4.5: 1–4 frames
Open the holder
2.1
Undo the latches and open the
holder.
Insert fi lm
2.2
Place fi lm in the holder with the refl ec-
tive fi lm base up (matte emulsion sur-
face down;
the fi lm against the stops.
28
• 6 × 6: 1–3 frames
26) and with the end of
26). Stop when the slides
Arrow
Direction of
insertion
30).
(120/220, 2¼ or Brownie)
• 6 × 7 – 6 × 9: 1–2 frames
Arrow
Direction
of insertion
Thumbnails
displayed in
order shown
fi lm and
Stops
Thumbnails
displayed in
order shown