Cleaning - Panasonic VL-CM851BX Operating Instructions Manual

R Make sure that the polarity ( ,
3
Insert the battery case into the wireless unit.
R Firmly push the battery case upward until it locks in place.
4
Slide the power switch (C) to ON.
R You can check if the power is actually on by confirming that the pair indicator (D) changes from
flashing to not lit.
Battery pack used in the Wireless Monitor
When the Wireless Monitor's battery pack runs out of power soon after being charged, replace it with a
new battery pack.
R Use the separately sold CGA-LB102 for a replacement battery pack (page 4).
– Battery specifications: lithium ion battery, DC 3.7 V, 940 mAh.
R Refer to page 14 for information on how to insert battery packs.

Cleaning

R Clean the unit with a soft, dry cloth. For excessive dirt, wipe the unit with a slightly damp cloth.
R When cleaning the surface of the Wireless Monitor, gently wipe the screen with a soft cloth (such as
one used for cleaning glasses) to prevent damaging the screen.
R Before cleaning the Base Unit and its electrical contacts, make sure to unplug the AC adaptor from the
power outlet.
) of the batteries is correct.
D
C
Useful Information
23