Table of Contents
Advertisement
Quick Links
Thank you for purchasing a Panasonic product.
Please read this manual before using the product and save it for future reference.
This product is not designed to be used for the prevention of property loss or intrusions.
In no event shall Panasonic be liable to any loss or damage arising out of the use of this product.
Installation Guide is supplied separately.
Information Guide
Wireless Sensor Camera
VL-WD812AZ
Model No.
Table of Contents
2
2
2
3
3
3
4
6
7
7
Advertisement
Table of Contents
Related Manuals for Panasonic VL-WD812AZ
Summary of Contents for Panasonic VL-WD812AZ
-
Page 1: Table Of Contents
This product is not designed to be used for the prevention of property loss or intrusions. In no event shall Panasonic be liable to any loss or damage arising out of the use of this product. Installation Guide is supplied separately. -
Page 2: Introduction
Introduction This product is an additional product designed to be used with the following Panasonic Video Intercom Systems. – VL-SWD501AZ/VL-SWD501UAZ (Main monitor station: VL-MWD501BX) (The corresponding models are subject to change without notice.) You must register this product with your Video Intercom System before it can be used. -
Page 3: Important Safety Instructions
R Do not perform any actions (such as fabricating, For best performance twisting, stretching, bundling, forcibly bending, damaging, altering, exposing to heat sources, or R Do not allow the lens cover placing heavy objects on the power cable) that may (A) or the heat sensor (B) to damage the power cable. -
Page 4: Sensor Operations
Note for product disposal, transfer, or return R When power fails, this product cannot be used. R Panasonic may not be liable for damages due to R Use the main monitor to perform the [Initialize external factors such as power failures. - Page 5 R The motion detection sensor and heat sensor are not designed to be used in situations that require high reliability. We do not recommend use of the motion detection sensor and heat sensor in these situations. R Panasonic takes no responsibility for any injury or damages caused by use of the motion detection sensor and heat sensor.
-
Page 6: Controls
Daytime or when it is bright At night or when it is dark Motion detection sensor Heat sensor R The brightness level is automatically determined by the camera when viewing images. A timer can be configured to switch the modes between day and night modes at specified times. (See the [Day and night switch] setting in the Operating Instructions of the Video Intercom System.) R The settings can be configured to match the installation environment by only operating the motion detection sensor and heat sensor at certain times, for example only during the day or only at night. -
Page 7: Cleaning
Indicator lamp After the camera has been registered to the main monitor, you can check the camera’s status and the wireless signal status from the main monitor by checking the status of the indicator lamp. Indicator display Camera’s status Flashing green A sensor has been triggered and the camera is calling the main monitor. - Page 8 R Names, company names, product names, software names, and logos mentioned in this manual are trademarks or registered trademarks of the companies concerned. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan http://www.panasonic.net/ © Panasonic System Networks Co., Ltd. 2014 PNQX7103ZA C0814MM0...