Menu Operations - JVC KD-X250BT Instruction Manual

Menu operations

1
(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
2
Menu item
DEMO
EQ PRESET
EASY EQ
PRO EQ
FADER *1*2
BALANCE *2
BASS BOOST
LOUD
(Loudness)
VOL ADJUST
(Volume adjust)
L/O MODE
(Line output
mode)
SUB. W *3
(Subwoofer)
SUB.W LPF *4
(Subwoofer low-
pass filter)
SUB.W LEVEL *4
(Subwoofer level)
BEEP
(Keytouch tone)
AMP GAIN
(Amplifier gain)
*1 If you are using a two-speaker system, set the fader level to "00".
*2 This adjustment will not affect the subwoofer output.
*3 Displayed only when <L/O MODE> is set to <SUB.W>.
*4 Displayed only when <SUB.W> is set to <ON>.
Selectable setting (Initial: [XX])
For settings, page 4.
For settings, page 18.
R06 — F06 [00]: Adjusts the front and rear speaker output balance.
L06 — R06 [00]: Adjusts the left and right speaker output balance.
+01/+02: Select your preferred bass boost level.
[OFF]: Cancels.
[LOW]/HIGH: Boosts low or high frequencies to produce a well-balanced
sound at a low volume level.
OFF: Cancels.
-05 — +05 [00]: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. ("VOL ADJ FIX" appears if "FM" is selected.)
Select if the REAR/SW terminals are used for connecting the speakers or
subwoofer (through an external amplifier).
SUB.W: Subwoofer
[REAR]: Rear speakers
OFF: Cancels.
[ON]: Turns on the subwoofer output.
[THROUGH]: All signals are sent to the subwoofer.
LOW 55Hz/MID 85Hz/HIGH 120Hz: Audio signals with frequencies lower
than 55 Hz/85 Hz/120 Hz are sent to the subwoofer.
-08 — +08 [00]: Adjusts the subwoofer output level.
[ON]/OFF: Activates or deactivates the keypress tone.
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum input power of each speaker is less than 50 W to prevent
damaging the speakers.)
[HIGH POWER]: The maximum volume level is 50.
3 Repeat step 2 if necessary.
To return to the previous menu, press
To exit from the menu, press DISP or MENU.
Menu operations
.
ENGLISH | 19