Using The Settings Menu - JVC KD-X250BT Instruction Manual

Bluetooth mobile phone

Using the SETTINGS menu

1 Enter the hands-free menu.
2 Select <SETTINGS>.
The following settings are applicable to the paired device. If another device is paired, perform the
settings again.
Menu item
P.BOOK SEL *
AUTO ANSWER
RING TONE
ECHO CANCEL
MIC LEVEL
MSG NOTICE
* Selectable only when the connected phone supports PBAP.
16 | ENGLISH
Selectable setting (Initial: [XX])
[PB IN PHONE]: The unit browses the phonebook of the connected phone.
PB IN UNIT: The unit browses the phonebook registered in the unit. (You can
copy the phonebook memory using <P.BOOK WAIT> (
03 SEC/05 SEC/10 SEC: The unit answers incoming calls automatically in
3/5/10 seconds.
[OFF]: Cancels.
[IN UNIT]: The unit rings to notify you when a call/text message comes in.
– CALL: Select your preferred ring tone (TONE 1 — 5) for incoming calls.
– MESSAGE: Select your preferred ring tone (TONE 1 — 5) for incoming text
messages.
Default ring tone is different according to the paired device.
IN PHONE: The unit uses the connected phones' ring tone to notify you when a
call/text message comes in. (The connected phone will ring if it does not
support this feature.)
(01 — 10) [04]: Adjust the echo cancellation delay time until the least echo is
being heard during a phone conversation.
(01 — 03) [02]: The sensitivity of the microphone increases as the number is
increased.
[ON]: The unit rings and "RCV MESSAGE" "[Device Name]" appears to notify
you of an incoming text message.
OFF: Cancels.
3 Repeat this step to perform the necessary
settings.
To return to the previous menu, press
To exit from the menu, press
.
.
page 21).)