Menu Operations - JVC KD-R423 Instructions Manual

Storing your own sound mode
You can store your own adjustments in
memory.
1
[Hold]
2
] <PRO EQ> ] <BASS/ MIDDLE/ TREBLE>
60/ 80/ 100/ 200 Hz
BASS
MIDDLE 0.5/ 1.0/ 1.5/ 2.5 kHz
TREBLE 10.0/ 12.5/ 15.0/ 17.5 kHz

Menu operations

1
[Hold]
If no operation is done
for about 60 seconds, the
operation will be canceled.
Menu item
DEMO
CLOCK SET
24H/12H
CLOCK ADJ * 1
DIMMER SET AUTO : Changes the display and button illumination between the Day/Night adjustments
BRIGHTNESS DAY [ 25 ] / NIGHT [ 11 ] : Selects the display and button illumination brightness level
3
SCROLL *
TAG DISPLAY ON : Shows the Tag information while playing MP3/WMA tracks. / OFF : Cancels.
* 1 Takes effect only when CT (clock time) data is received.
* 2
The illumination control lead connection is required. (See "Installation/Connection Manual.") This setting may not work
correctly on some vehicles (particularly on those having a control dial for dimming). In this case, change the setting to
any other than <DIMMER AUTO>.
* 3
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Frequency / Level / Q [Initial: Underlined]
–06 to +06 [ 00 ]
–06 to +06 [ 00 ]
–06 to +06 [ 00 ]
2
Selectable setting, [Initial: Underlined]
ON : Display demonstration will be activated automatically if no operation is done for
about 20 seconds. / OFF : Cancels. (page 4)
For settings, see page 4.
For settings, see page 4.
AUTO : The built-in clock is automatically adjusted using the CT (clock time) data in the
Radio Data System signal. / OFF : Cancels.
in <BRIGHTNESS> setting when you turn off/on the car headlights *
Night adjustments in <BRIGHTNESS> setting for the display and button illumination. /
OFF : Selects the Day adjustments in <BRIGHTNESS> setting for the display and button
illumination.
[00 — 31] for day and night.
ONCE : Scrolls the displayed information once. / AUTO : Repeats scrolling (at 5-second
intervals). / OFF : Cancels.
(Pressing DISP for more than one second can scroll the display regardless of the setting.)
3
Adjust the sound elements (see table
below) of the selected tone.
4 Repeat steps 2 and 3 to adjust other
tones.
The adjustments made is automatically
stored and changed to "USER."
Q1.0/ 1.25/ 1.5/ 2.0
Q0.75/ 1.0/ 1.25
Q FIX
3
Repeat step 2 if necessary.
• To return to the previous
menu, press T/P BACK.
• To exit from the menu, press
MENU.
2 . / ON : Selects the
Continued...
ENGLISH 13