Sharp HS-DM4062 User Manual page 14

Main Menu – System Set – RS-485
Main Menu – System Set – Pan/Tilt Device
Control: Keypad, mouse
* Mouse control: press ESC to PTZ mode, press AUTO button, and then once-click left button
of mouse to control PTZ movement.
Press quad button + number 1 ~ 4 button to set presets, press AUDIO + 1 ~ 4 to call preset.
Press AUTO to start auto presets, AUTO again to cancel.
Up/Down/Left/Right: PTZ dome direction control
+ / - : Zoom in / Zoom out
The AUTO command is 76 + Preset. The command would be different if connect to
others PTZ dome. It is normal if no any action after press AUTO.
This page is for control keyboard connection.
Please choose baud rate and ID. DVR
maximum amount ID is 16
Other settings just leave them as default
14