Maintenance - Vivotek TC5632 User Manual

Maintenance

Six actions can be selected.
"Reboot system" Click the reboot button to restart system
"Restore" Click it to restore all setting to factory default except setting in "Network
type" in network page and/or Daylight Saving Time in system page.
"Upload" Click to upload daylight saving time rules to the camera server.
"Export Daylight Saving Time Configuration File" If you want to use the
daylight saving time function for the first time, click to export daylight saving time
rules in *.xml file format from the camera server. Make changes on *.xml file and
then upload it to the camera.
"Calibrate"
Recalibrate the home position to the default center to recover the tolerance cased by
some external forces. This function is the same as the "Center" button on the
Remote Controller. Please note that there is no confirming message box after clicking
on the "Calibrate" button, the Network Camera will calibrate immediately.
"Upgrade firmware" Select the firmware file and click upgrade button
- 59 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532