Vivotek TC5632 User Manual page 37

64bits is the default setting.
"Key format" Hexadecimal or ASCII. "HEX" is the default setting.
▶ "HEX" digits consist of the numbers 0~9 and the letters A-F.
▶ "ASCII" is a code for representing English letters as numbers from 0-127 except
", <, > and space characters that are reserved.
"Network Key" Entering a key in either hexadecimal or ASCII format. When
selecting different key length, acceptable input length is listed as following:
64 bits key length: 10 Hex digits or 5 characters.
128 bites key length: 26 Hex digits or 13 characters.
Note: When 22("), 3C(<) or 3E(>) are input in network key, the key format can't be
changed to ASCII format.
"Algorithm" Choosing one of the following algorithm for WPA-PSK modes
▶ "TKIP"
▶ "AES"
"Pre-shared Key" Entering a key in ASCII format. The length of the key is 8 ~ 63
Some invalid settings may cause the system failing to respond. Change the
configuration only if necessary and consult with your network supervisor or experienced
users for correct settings. Once the system has lost contact, refer to Appendix A for reset
and restore procedures.
- 36 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532