Technibel MCAF78MR5I Technical & Service Manual page 48

2. Manual Operation
OI-047-13-EG
Operation with the Remote Control Unit (continued)
STEP 4
STEP 5
NOTE
Check that the circuit breaker on the power panel is turned on.
If the automatic operation settings of the unit do not meet your needs, press
the setting buttons as described below and change the settings as desired.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
To stop the air conditioner, press the ON/OFF operation button again.
NOTE
When multiple indoor units are used and units in other rooms are already
operating, they will be set to the same mode of operation as the operating indoor
units.
STEP 2
STEP 3
STEP 1
Press the MODE selector button and select the desired
mode.
For heating operation
For dehumidifying operation
For cooling operation
To start the air conditioner, press the ON/OFF operation
button.
Press the TEMP. setting buttons to change the temperature
setting to the desired temperature.
Adjustable temperature range:
30 °C max.
16 °C min.
Set the FAN SPEED selector button to the setting you want.
Press the FLAP button and set the airflow direction as
desired.
(Refer to "Adjusting the Airflow Direction" on page 21.)
→
→
→
or 86 °F max.
60 °F min.
13