ZALMAN Reserator XT User Manual page 9

5.10 Front Panel Display
①
⑤
15 •The specifications of this product and its components may change without prior notice to improve performance.
RESERATOR XT
②
③
④
⑥ ⑦
RESERATOR XT
◈ Front Panel Display
① Fan Speed Gage
- Displays the Fan Speed(rpm). If there is a problem, the display will flicker. If the
flickering is observed, please check if there are any mechanical or pump related
problems.
② FND(Flexible Numeric Display) Display
- Temperature Display
Coolant Temperature(upper display)
Ambient Temperature(lower display)
- Coolant Level Sensing
If a certain quantity of coolant is unavailable, an alarm will sound and the display will
flicker. If the flickering is observed, please refill with coolant.
- Coolant Temperature Sensing
If the coolant' s temperature reaches 60℃(92℉) and above, an alarm will sound and
the FND Display will flicker. If the flickering is observed, please check if there are any
problems.
③ Coolant Flow Rate Gage
- Displays the coolant flow rate. If there is a problem, the display will flicker. If the
flickering is observed, please check if there are any mechanical or pump related
problems.
◈ Control Knob & Buttons
④ Control Knob
- Controls the Fan Speed(rpm) and Coolant Flow Rate.
⑤ ℃/℉ Button
- Sets the temperature display to Celsius(℃) or Fahrenheit(℉).
⑥ AUTO/MANUAL Button
- AUTO Mode: Automatically adjusts fan speed and coolant flow rate.
- MANUAL Mode: Allows the user to manually adjust fan speed and coolant flow rate.
⑦ LED/RESET Button
- LED On/Off: Short pressing of the button turns the displays' LEDs On & Off.
- RESET: Pressing the button for at least 5 seconds will reset the Reserator XT.
•The specifications of this product and its components may change without prior notice to improve performance. 16