Preparation; Attaching The Stand - Sharp LC-42D83X Operation Manual

Preparation

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work, spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confi rm the 8 screws supplied with the TV.
1
Short screws (g4)
(used in step 3)
Attach the supporting post for the stand unit
2
onto the base as shown below.
LC-42D83X
LC-46D83X/LC-52D83X
6
52D83X_en_b.indd 6 52D83X_en_b.indd 6
Long screws ( g 4)
(used in step 2)
Long screw
Hex
key
Long screw
Hex
key
1 Insert the stand into the openings on the
3
bottom of the TV.
2 Insert and tighten the 4 short screws into
the 4 holes on the rear of the TV.
NOTE
• To detach the stand, perform the steps in reverse order.
LC-42D83X
CAUTION
• Adjust the screen with both hands. Put one hand on
the TV and rotate the screen while steadying the stand
with your other hand.
The TV can be rotated up to 15 degrees to the right or left.
Hex key
Short
screw
Soft
cushion
15°
15°
2007/08/31 16:24:47 2007/08/31 16:24:47