Aquos Link Connection; Connecting An Aquos Bd Player/Aquos Recorder Via The Aquos Audio Speaker System; Connecting An Aquos Bd Player/Aquos Recorder Only; Aquos Link Setup - Sharp LC-42D83X Operation Manual

AQUOS LINK

AQUOS LINK connection

First connect the AQUOS Audio speaker system or an AQUOS BD Player/AQUOS Recorder that supports the
HDMI CEC protocol.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, fi rst turn on the power of the TV with all relevant
device's power turned on. Change the external input source by pressing TV/VIDEO, select the appropriate input source and
verify the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
Connecting an AQUOS BD Player/AQUOS Recorder via
the AQUOS Audio speaker system
HDMI cable
AQUOS BD Player/
AQUOS Recorder

AQUOS LINK Setup

AQUOS LINK Auto power on

If this is activated, the One Touch Play function is enabled.
While the TV is in standby mode, it automatically turns on
and plays back the image from the HDMI source.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "AQUOS LINK Setup",
3
and then press ENTER.
52
52D83X_en_f.indd 52 52D83X_en_f.indd 52
HDMI cable
AQUOS Audio
speaker system
Connecting an AQUOS BD
Player/AQUOS Recorder only
Optical AUDIO
cable
HDMI cable
Press a / b to select "Auto Power On", and
4
then press ENTER.
Auto Power On
Selecting Recorder
Using Genre Info.
Press c / d to select "On", and then press
5
ENTER.
Press MENU to exit.
6
NOTE
• The factory default for this item is "Off".
AQUOS BD Player/
AQUOS Recorder
On Off
2007/08/31 16:26:14 2007/08/31 16:26:14