ZyXEL Communications NBG-419N Installation Manual page 3
Hide thumbs
Also See for NBG-419N:
- User manual (298 pages) ,
- Quick start manual (90 pages) ,
- Installation manual (17 pages)
Advertisement
•
Connect the Ethernet port of your computer to one of the LAN ports on the NBG-
419N.
•
Connect an Ethernet cable from the WAN port on the NBG-419N to the Data jack
going to the internet. The Data jack could be on the back of your modem or router. If
you are connecting to the new fiber network, you can connect directly to the wall
jack.
•
Use the Power Adapter to connect the POWER socket to an appropriate power
source.
Note: These steps are only required for the initial router setup.
PO Box 190 2504 Ave. D. Wilson, KS 67490
Voice 800.432.7607
FAX 785.658.3344
OR
Page 3 of 12
Advertisement
