Hardware Installation - ZyXEL Communications NBG-419N Installation Manual

Purpose
This guide will assist you in the basic installation and setup of the ZyXEL NBG-419N
wireless home router and is written for Windows ®XP, Windows ®Vista, Windows ®7, and
MAC Operating systems. The initial configuration must be done through a hard-wired
Ethernet cable from your computer to the router. This router is compatible with ADSL
(modem required) and Broadband (FTTH).

Hardware Installation

Connect the antennas to the antenna sockets. Ensuring they are screwed in securely
•
and angled upward. If wall mounted the antennas should be straight (parallel to the
body of the router).
PO Box 190 2504 Ave. D. Wilson, KS 67490
Voice 800.432.7607
FAX 785.658.3344
Page 2 of 12