Initial Setup Of The Iscan To Your Display - Abt iScan VP30 Owner's Manual

Even though the specifications indicate that this 50" plasma has a native resolution of 1366x768, ABT
has found that most plasmas with this stated resolution actually have a 360x768 native resolution.
Most other displays do specify the correct native resolution; this display is an exception.
below are several different popular display technologies and their most likely native resolutions.
Plasma
42-43" – 852x480, 1024x768, 1024x1024 (ALiS)
50-63" – 1280x768, 1360x768, 1365x768, 1366x768
DLP
Rear Projection – 1280x720 (720p), 1920x1080 (1080p)
Front Projection – 852x480, 848x600, 1024x768, 1280x720 (720p)
LCD
Rear Projection – 1280x720 (720p), 1366x768
Front Projection – 1024x768, 1280x720 (720p), 1366x768
Direct View – 1024x768, 1280x720 (720p), 1366x768, 1920x1080 (1080p)
LCoS
Rear Projection – 1280x720 (720p), 1366x768, 1920x1080 (1080p)
Front Projection – 1024x768, 1280x720 (720p), 1366x768, 1920x1080 (1080p)
CRT
Rear Projection – 480p, 540p, 1080i
Front Projection – 1280x720 (720p), 1280x960, 1440x960, 1440x1152, 1920x1080 (1080p)
Initial Setup of the iScan to Your Display:
Test Patterns used:
The following information uses a Fujitsu 50" plasma (Model P50XHA10US) as an example. As stated
above, this display has an actual native resolution of 1360x768.
1 - Select the preset which is closest to the output resolution that you need. In this situation,
the closest preset is 366x768.
output setup
2 - Display the 'Frame/Geometry' test pattern to verify that the image is positioned correctly
on your display.
Configuration
NOTE: To turn the test patterns on and off, use the Test Patterns button on your remote control.
You can also navigate backwards and forwards through the test patterns, using the < and > buttons
respectively.
33
Frame Geometry
Checker board
Vertical lines
Horizontal Lines
Judder
_ _
format 366x768
_ _
Test patterns frame Geometry