Auto Linking Of Input And Display Profiles - Abt iScan VP30 Owner's Manual

• Active Output AR
• Sync Type
• Color Space RGB
• output level
• Frame Rate
• border level
• HdCp Mode
Selecting and Saving a Display Profile
Use the following procedure to select and save a display profile:
1. Set up the profile by making changes to the output setup menu items. If you make custom
settings (such as output timing parameters), they are saved to User.
2. Save the settings to a profile by selecting Profile 1 through 4 in the Save menu and
pressing enter.
3. Once the Profile is saved, the Save menu is grayed out until you make changes to the
profile again.

Auto Linking of Input and Display Profiles

The Auto feature links a specific input to a display profile. To enable this feature, use Output Setup
] Display Profile ] Auto. When you select an input/format, the display profile used (Profile 1 through
4 or User) is saved in the saved input settings. When you turn Auto On, the system uses a display
profile based on the selected input.
For example, suppose you choose Display Profile 1 using Video 1 input and Display Profile 2 using
S-Video 1 input.
• With Auto set to On, when Video 1 is the active input, the system automatically uses
Display Profile 1.
• When S-Video 1 is the active input, Display Profile 2 is used.
When Auto is Off, the selected display profile is used independently of the active input.
29
16:9
H-/V-
4:4:4
Video
50Hz input, unlocked to 59.94, 60Hz input – locked.
20
on