Changing A Magnetic Stripe Encoder Configuration - DataCard SR200 User Manual

6.
Enter a configuration name and click OK. The Datacard SR‐CR retransfer magnetic stripe plug‐
in : [name] dialog box opens.
It may be helpful to give the configuration the same name as the ID Works project or
WebID application that will use it.
7.
(Optional) In the Designer Field Names area, change the track names from the default values
(Track 1, Track 2, Track 3) to the names of the Production Form or WebID page fields that will
supply data for the tracks.
8.
Save and close the new configuration:
a.
Click Save. The Datacard SR‐CR magnetic stripe Configurations dialog box closes.
b.
Click Exit and then click OK to close the Edit Field Properties [Magnetic Stripe] dialog box.

Changing a Magnetic Stripe Encoder Configuration

1.
Open or create an ID Works project that has a card design with a magnetic stripe field.
2.
Select the magnetic stripe field and open the Edit Field Properties [Magnetic Stripe] dialog
box. Refer to the online help topic "Add a magnetic stripe field to a card" for step‐by‐step
instructions.
3.
On the Encoding tab, select Datacard SR‐CR retransfer magnetic stripe plug‐in from the
Device list.
10 SR200 & SR300 Plug-in User's Guide