DataCard SR200 User Manual page 16

4.
On the Encoding tab, select Datacard SR‐CR retransfer magnetic stripe plug‐in in the Device
list.
5.
Also on the Encoding tab, select a configuration from the drop‐down list.
Refer to "Creating a New Magnetic Stripe Encoder Configuration" on page 9 or "Changing a
Magnetic Stripe Encoder Configuration" on page
configuration.
6.
Click OK. The Edit Field Properties [Magnetic Stripe] dialog box closes.
7.
Using the ID Works Field Connector, connect Production Form fields to the appropriate tracks
in the Production Output area. Refer to the ID Works Designer online help topic "Connect
fields" for step‐by‐step instructions.
In WebID applications, card fields are automatically connected to database columns if the
card field name matches the database column name.
8.
Print a test card for your project from the ID software, using the ID Works Production
application or the WebID Card Issuance Workstation.
Sample cards printed in the ID Works Designer application are not encoded.
8
10 if you need to create or edit an encoder
SR200 & SR300 Plug-in User's Guide