Control Pad Features - Kenmore 790. 4045 Use & Care Manual

Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide•
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below•
FEATURE
INDICATOR
LIGHTS--
These light to
show which used to activate oven I_ckout setting.
feature is in use.
\
®
BAKE PAD--Used
to select the bake
function.
BROIL PAD-- Used
to select the variable
broil function.
STOP CLEAR PAD-- Used to clear any
function previously entered except the time of
day and minute timer. Press STOP CLEAR to
stop cooking. Also the STOP CLEAR pad is
UP and DOWN ARROWS PADS Used along with the
function pads to select oven temperature, cook time,
start time (when programming an automatic start
time), time of day, clean time and minute timer.
/
SELECT CLEAN PAD
Used to select the Self-
Cleaning cycle. A 2 or
3 hours Self-Clean time
may be selected.
® ® Q Oven • ®
Q Preheat
Q Doer Locked
I
OVEN, PREHEAT & DOOR LOCK LIGHTS* The "Oven" light will glow
each time the oven unit turns on to maintain the set oven temperature. The
"Preheat" light will glow when the oven is first set to operate, or if the
desired temperature is reset higher than the actual oven temperature. The
"Door Locked" light will flash until the door locks when the self-clean
cycle is in use. It glows constantly after the door locks.
CLOCK SET PAD
Used to set the
time of day.
COOK TIME PAD
Used to enter the
length of the
baking time.
STOP TIME PAD
Used to set the
desired stop time
for baking. May
be used with
COOK TIME to
program a
delayed bake
cycle,
\
TIMER SET/OFF PAD Used to set
or cancel the minute timer. The .............
minute timer does not start or stop ...............
cooking. Also, TIMER SET/OFF Pad ""'
is used to set the Continuous Bake ..................
Featu re.
*Note: The OVEN indicator light on the electronic display wi!l turn ON and OFF when using the Bake feature and during
preheati This is normal and indicates that the oven is cycling t0 maintain the selected baking temperaturel Whe n the
preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation• Press and hold _,_,_After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed• To return the sound, press and hold' _,,_ again for 7 seconds until the control beeps
once.
Note: The control will return to the audible mode after a power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1 Press "-- --" appears in the display.
2. Press and hold the A until "HI" appears in the display.
oC
3. Press and hold _il until °F or appears in the display.
4. Press the A or V to change °Fto °C or °C to °F.
5. Press any control pad to return to normal operating mode.