Pin
Signal name
No.
11
AUX1
12
AUX2
o CEU (camera extension unit)
connector (26-pin)
Connect to the CA connector (26-pin) of the
XDCU-50 with the optional CCZ-A cable.
Power is supplied from the XDCU-50.
For details on the pin assignments, refer to the
description on the CA OUT connector in the
Operating Instructions for the XDCU-50.
p INTERCOM LEVEL knob
Adjusts the receiving volume level of the
headset connected to the INTERCOM
connector.
q Camcorder screws
Screws to secure the adaptor to the
camcorder.
r Camcorder connector (50-pin)
Connect to the camera adaptor connector of
the camcorder (requires installation of an
optional interface) to send and receive
video and audio signals.
s Camcorder power supply connector
Supplies power to the camcorder.
t V shoe
This is a V shoe for attachment of this
adaptor to the camcorder.
Description
General-
purpose line 1
between this
adaptor and
XDCU-50
General-
purpose line 2
between this
adaptor and
XDCU-50
u Camcorder bracket attachment
screw hole
This is a screw hole for a bracket to increase
the security of the attachment of this
adaptor to the camcorder.
v Accessory screw holes (for general
use)
These are a screw hole for an U1/4-20
screw to secure an accessory, and eight
screw holes to secure the accessory fitting
shoe (for the DXF-C50W viewfinder).
w Accessory screw holes (for HD
viewfinder)
These are accessory screw holes (4) for M4
screws to secure an HD monitor.
Names and Functions of Parts
11