Table of Contents
Advertisement
PROGRAMMED
DEFROST
The power levels for defrosting
are predetermined
and programmed
into this oven. The oven will defrost at "HI" power
for the beginning of the chosen time and at power level 30 for the remaining period of time.
1. Touch CLEAR.
2. Touch PROGRAMMED
DEFROST.
"0" will show in
the display window.
3. Set the defrosting
time by following the "Programmed
Defrosting
Chart" on Pages 22 through 25.
4. Touch START. The oven will begin and the time will
begin counting
down in the display window. A tone
will sound
when the time is over and the oven will
automatically
shut'off.
NOTE:
If you plan to use additional
cooking
stages
immediately
following Programmed
Defrost cycles, you
must allow for standing
time as recommended
on the
Programmed
Defrosting
Charts on pages 22 through 25.
This can be accomplished
as follows:
I. Touch
PROGRAMMED
DEFROST
and enter the
defrosting
time.
2. Touch MEMORY/RECALL
3. Touch TIME.
4. Enter standing time per charts
(pages 22 thru 25).
5. Touch POWER CONTROL.
6. Enter "0".
7. Touch MEMORY/RECALL.
8. Set the next cooking stage per cookbook
or USE
AND CARE INSTRUCTIONS.
The cooking process
can be set for up to 3 stages when
Programmed
Defrost is one of the stages.
EXAMPLE:
To defrost two pounds of ground beef, use
the PROGRAMMED
DEFROST
cycle for 9 minutes.
I. Touch CLEAR.
2. Touch PROGRAMMED
DEFROST.
The display
window will show "0".
l_onmor_s
_EZ3_
FfIF_F_
i
.
Set 9 minutes by touching "9",
"0" and "0". "900" will show in
the display window.
Kerlnaor8
.
Touch START. The oven will
begin to operate
and time will
begin to count down in the dis-
play window.
A tone will sound and the word
"End" will show in the display
window for two seconds when
time is over and the oven will
automatically
shut off.
Kenc_ore
21
Advertisement
Table of Contents
