Mounting The Microphone - Shure VP83F User Manual

Installing the Memory Card and Batteries
functionality.
card installed.
memory card and battery compartment.
To Install: Insert the card into the slot located above the battery door,
To Remove: Press the card to unlock it, then pull it from the device.
Note: Format the memory card in the device prior to first use. Refer to the memory
card requirements section in the user guide for additional information.
Open the battery door located inside the front panel by pressing the
fastener down. Insert the batteries according to the polarity indicators.
Note: The battery door must be closed and latched before closing the front panel.

Mounting the Microphone

On a Camera:
1. Slide the microphone onto the camera shoe.
Tighten the knurled ring to secure.
Tip: In addition to the vibration isolation provided by the
shock mount, the low-cut filter can be used to further
eliminate handling noise and low frequency rumble.
On a Tripod:
clockwise to tighten onto a tripod. For other mounting solutions, such as microphone stands or boom poles, an adapter may be required.