T+A SADV 1245 R User Manual page 51

Problem: Surround decoder / receiver fails to
recognise digital surround programs
(Dolby Digital or dts).
Cause: The digital output of the SADV 1245 R is
wrongly configured (PCM instead of ALL).
Remedy: Set the digital output to the correct ALL
setting (see 'Basic device settings').
Problem: Nothing displayed on the screen.
Cause: Screen switched off.
Remedy: Press     button to switch it on again.
Problem: The disc will not play once the disc
drawer is closed.
Cause 1: Disc not inserted correctly.
Remedy: Position the disc centrally: printed face up.
Cause 2: Disc soiled.
Remedy: Carefully clean the disc by wiping with a
soft cloth from the centre to the edge.
Replace the disc and try again.
Cause 3: Disc damaged in the area of the Table of
Contents (TOC). Disc unusable.
Remedy: No remedy possible.
Cause 4: Machine has got very cold (e. g. after
transport), allowing condensation to form
on the laser sensor optics.
Remedy: Leave the machine to warm up for about
an hour in a warm, well ventilated place.
Problem: Disc stops playing, or 'skips'.
Cause: Disc dirty or damaged.
Remedy: Clean disc. Damage cannot be repaired!
Problem: Black and white picture, distortion or
scrolling when playing a DVD or VCD.
Cause: The television is not set to the same
picture name (PAL / NTSC) as the disc, or
cannot process its picture norm.
Remedy 1: chose PAL/NTSC according to your TV
set in the menu 'Preferences'
Remedy 2: Use a multi-norm TV set. These sets
automatically switch to the current picture
norm, or can be switched over manually
Problem:
After removing the disc the machine
fails to return to the Start screen.
Cause: The program may be waiting for a further
disc.
Remedy: Insert the next disc.
Problem:
The picture is displayed too small or
incompletely (abbreviated).
Cause 1: The DVD in the drawer is not set to the
same picture format (4 : 3 or 16 : 9) as the
TV set connected to the system.
Remedy:
Set the correct picture format in the
SETUP menu.
Cause 2: Many DVDs contain film recordings in
different picture formats on the front and
rear faces.
Remedy: Turn the DVD over, or set the correct
picture format in the SETUP menu.
Cause 3: The television is set to the wrong picture
format.
Remedy: Set the TV to the correct picture format,
i. e. the one corresponding to the DVD.
Problem: The SADV 1245 R fails to carry out
certain functions.
Cause 1: Function blocked for this DVD.
Cause 2: Function (e. g. camera angle, sub-titles
etc.) not present on this DVD.
Remedy: No remedy possible.
Problem: After inserting a DVD the screen
displays a warning of the wrong
regional code.
Cause: The DVD is not approved for your region.
Remedy: Contact your DVD supplier and exchange
the disc for a version approved for your
region.
Problem: In rare cases the DVD's Disc Menu
cannot be operated when the 'Pan-
Scan' picture format is set.
Remedy: Set picture format to "Letterbox"; call up
the Disc Menu again.
51