Table of Contents
Advertisement
VX700-3
Color Temp
Factory Default
Brightness
Blacklevel
AutoColor
Initial
EDID
CopyColorTemp
Gamma
Otherwise, follow the procedure described in session 1.4.1 to enter the factory
mode again
1.4.3 Under factory mode, press "power" key. the monitor will exit factory mode
and enter normal display mode.
1.5 Methods to enter/exit manual color alignment menu
Under factory mode, select "Color Temp Manual" from factory OSD menu. It will
display the following color temperature adjust menu.
Use "up" and "down" to move cursor between items "9300", "6500","5400"
and"5000". Press "2" to select which color temperature to be adjusted. It will
ViewSonic Corporation
Factory
01/10 / 2003
Confidential – Do Not Copy
VX700-3
Advertisement
Table of Contents
