Supplied Accessories (AJ-PCD35P/AJ-PCD35E)
AC adapter
Power cable for AC adapter
For AJ-PCD35P
For AJ-PCD35E
(continental Europe,etc)
CD-ROM
(Driver for P2, P2 card manager, dedicated software for the respective P2 devices, install manual
and operation manual)
Operating Environment Required for Installation
To operate the P2 drive, the following environment is required on the host computer.
Empty slot(s) (full height) for the PCI EXPRESS : 1 or more
To mount the each P2 drive in a personal computer, 1 emmty slot is required. It is possible to connect
up to 2 units.
The following environment is recommended for the host computer to make full use of the features of P2
drive.
A striping configuration using 4 or more hard disk drives is recommended to attain sufficient transfer
speed when transferring data to the hard disk drive.
For AJ-PCD35E
(U.K.)
PCI EXPRESS board
PCI EXPRESS cable
Mounting
screws (8)
Rubber feet (4)
7