Dell Wyse ThinOS C10LE Administrator's Manual page 32

Chapter 3
26
Use the Mouse tab to select the Mouse Speed and mouse orientation (you can swap
mouse buttons for left-handed operation by selecting Swap left and right mouse
buttons).
Use the Audio tab to select the volume settings for connected devices. For example,
connected USB headsets will be shown in the drop-down list for selection. Use the HD
Audio option for analog earphone use, and the Boost option for audio enhancement.
NOTE: The sound recorder is contained in the Audio tab of the Peripherals dialog box.
It allows you to:
·
·
·
Use the following guidelines for the Serial tab:
Select Port - Select the port to which this setup definition applies. Either COM 1,
•
COM 2, COM 3, or COM 4 can be selected (default is Port COM 1). For Models SX0
and VX0, COM 1 or COM 2 selects from either the USB or serial device.
Baud Rate - Either 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200 baud
•
can be selected (default is 9600).
Parity - Either None, Even, or Odd can be selected (default is None).
•
Stop - Either 1, 1.5, or 2 stop bits can be selected (default is 1).
•
Collect information about the speaker and microphone currently being used.
Examine the performance of the speaker and microphone currently being used.
Export the recorded audio sample to a USB key for archiving and further analysis.