Configuring Thin Client Settings Locally
Display
Use the Display dialog box (System Settings icon > Display) to select the resolution
and refresh rate for the monitor used with the thin client. It also allows you to configure
the way two monitors display.
TIP: The number of icons that can be displayed on the desktop depends on the
desktop resolution and administrator configuration. On thin clients that only support 8
bit color, the 1280 x 1024 resolution will be used to display full screen connections. The
1280 x 1024 resolution will not be used to display the desktop, windowed connections,
or seamless connections.
Use the following guidelines for the General tab:
Select best display setting on DDC monitor - If the monitor is VESA DDC2B
•
(Display Data Channel) compatible, selection of this option allows the thin client to
automatically select the best resolution and refresh rate. If your monitor is not DDC
compatible, a Monitor does not support Plug and Play message is displayed (click
OK to acknowledge the message and remove it from the screen).
DDC table - If the monitor is VESA DDC2B (Display Data Channel) compatible,
•
selection of this option allows you to select the resolution and refresh rate you want
from the list.
User defined display setting - Select this option and select the resolution and
•
refresh rate supported by your monitor (all combinations are allowed):
Resolutions include:
640 x 480 (not on T10D)
800 x 600 (not on T10D)
1024 x 768
1152 x 864
1280 x 720
1280 x 768 (not on T10)
1280 x 1024
1360 x 768 (not on T class)
1366 x 768
1368 x 768 (not on T class)
1400 x 1050
1440 x 900
1600 x 900
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200
1920 x 1440 (R class only)
2560 x 1080 (Single monitor only; R class and D/Z class only)
2560 x 1440 (Single monitor only; R class only)
2560 x 1600 (Single monitor only; R class and D/Z class only)
23