Door Preparation - Samsung SHS-3420 User Manual

Door Preparation

|
Step 1. Check Door Status
1) This lock supports door thickness of 1-7/32˝ to 1-9/16˝ (31 to 40 mm).
2) Using the provided lock template, ensure that there are no obstructions that would prevent installing the
lock properly.
3) Take note of which orientation the deadbolt will need to be installed, left hand or right hand.
Left-Handed Door
When viewed from the Outside,
the hinge is on the left.
Step 2. Mark the Door
Check the location and direction of the deadbolt, attach the drilling
template (page 23) on the side of the door, and mark on it with a pen.
1) Align the horizontal line across the door.
2) Align the vertical line over the door.
3) Mark the centers of the holes with the drilling template.
4) Mark the centerline of the deadbolt by aligning it with the vertical
line.
The hand type is not set by default and it is set
to the direction where the magnetic is detected.
In order to change the hand type when it is
already set, press the [OPEN/CLOSE] button
while the magnet is detected from the desired
direction.

Right-Handed Door
When viewed from the Outside,
the hinge is on the right.