Handsfree Calling And Audio Streaming - Bluetooth Function; Before Using The Bluetooth Function; Basic Procedure Of The Bluetooth; Function - Sony XAV-701HD Operating Instructions Manual

Handsfree Calling and Audio
Streaming — Bluetooth function
Before using the Bluetooth

function

Basic procedure of the Bluetooth

function
1 Pairing
When connecting Bluetooth devices for the
first time, mutual registration is required. This
is called "pairing." This registration (pairing)
is required only for the first time, as this unit
and the other devices will recognize each
other automatically from the next time.
Note
If you delete the device registration from this unit,
you need to perform pairing again.
2 Connecting
After pairing is made, connect this unit and
the Bluetooth device. Depending on the
device, connection is automatically made
along with the pairing.
3 Handsfree calling/audio streaming
You can make/receive a handsfree call, or
listen to audio through this unit.

Bluetooth status indications

None: Bluetooth signal is off.
Lit: Bluetooth signal is on.
None: No device is connected for
audio streaming.
Flashing: Connection is in progress.
Lit: A device is connected.
None: No cellular phone is connected
for handsfree calling.
Flashing: Connection is in progress.
Lit: A cellular phone is connected.
Indicates the signal strength status of
the connected cellular phone.
Indicates the remaining battery status
of the connected cellular phone.
None: No unread SMS messages
Lit: Unread SMS message(s)

Installing the microphone

To capture your voice during handsfree calling,
you need to install the microphone (supplied).
For details on how to connect the microphone,
refer to the supplied "Installation/Connections"
guide.
37