Table of Contents
Advertisement
For video playback
"All": Repeats all video files in the iPod.
"Track": Repeats the current video.
"Group"*: Repeats the current item of the
selected play mode.
The shuffle options are as follows:
For audio playback
"OFF": Returns to normal play mode.
"Album"/"Podcast"/"Artist"/"Playlist"/
"Genre"*: Plays tracks of the selected play
mode in random order.
"Device": Plays all tracks in an iPod in random
order.
* Differs depending on the selected play mode.
Note
Displayed options may not conform to actual
operation.
Operating an iPod directly
— Passenger App Control
You can directly operate an iPod connected to
this unit.
1
During playback, touch
Deactivating the Passenger App
Control
During "Passenger App Control", touch screen,
then "Cancel" button.
The play mode changes to resuming mode.
Notes
• App image and Video can only be displayed on this
unit while the parking brake is applied.
• App and Video are only controllable from iPhone
and iPod.
• Apps compatible with Passenger App Control are
limited.
• To output video to this unit, you need to activate the
video output of the iPod.
• The volume can be adjusted only by this unit.
• The repeat and shuffle settings will be off if the
Passenger App Control mode is canceled.
34
Useful Functions
Searching for a track by
listening to track passages
— ZAPPIN™
While playing short track passages from a USB
device or an iPod in sequence, you can search for
a track you want to listen to.
This function is convenient, for example, when
searching for a track in shuffle or shuffle repeat
mode.
1
During audio playback, touch "ZAP."
In the case of USB Music, ZAP mode starts
from the currently playing track.
The most melodic or rhythmical sections of
tracks are played.
Those passages are played for the set time.
Note
Tracks need to be analyzed by 12 TONE ANALYSIS.
"ZAP" touched.
.
In the case of iPod, ZAP mode starts from a
passage in the next track.
"ZAP"
touched.
2
Touch "ZAP" when a track you want to
listen to is played.
In the case of USB Music, playback returns to
normal from the current position until the end
of the track.
In the case of iPod, the selected track plays
from the beginning.
To search for a track via ZAPPIN mode again,
repeat steps 1 and 2.
Tips
• You cannot select the track passage to play.
• You can select the playback time. Touch
select the playback on time for the ZAPPIN function:
"6 sec.," "15 sec.," "30 sec.."
The playback section of each
track in ZAPPIN mode.
The playback section of each
track in ZAPPIN mode.
, then
Advertisement
Table of Contents
