Yamaha EMX 5000-20 Owner's Manual page 13

Digital effect section
This section enables you to turn the built-in two-
channel digital effects on/off and select the effect
type.
O
P
Q
S
T
U
O
P
Q
R
O
P
Q
S
R
T
S
U
T
U
PROGRAM selector
This knob selects the effect type for the internal
digital effect.
PARAMETER control
This knob adjusts the time parameter of the
internal digital effect.
AUX 1/2 control
This knob adjusts the level of the return signal
that is sent from the built-in digital effect to the
AUX 1/2 buses.
TAP switch, indicator
Only if the PROGRAM selector has selected
TAP DELAY as the internal effect type, you can
press this switch to set the desired delay time.
Press the TAP switch several times, and the inter-
val between the last two presses will be set as the
delay time. The specified time will be remem-
bered even if the power is turned off.
The LED beside the switch will blink in synchro-
nization with the delay time only when the effect
type is TAP DELAY.
EFFECT 1/2 ON switch
This switch turns the internal digital effect on/
off.
PFL (Pre-fader listen) switch
When this switch is on, the signal from before the
EFFECT 1/2 RTN faders U will be sent to the
PHONES jack (input/output panel D).
EFFECT 1/2 RTN fader
This fader adjusts the level of the return signal
that is sent from the built-in digital effect to the
STEREO bus.
EMX5000-20/EMX5000-12—Owner's Manual
13
Control panel