Number Plate Light; Side Turn Signal Lights - Opel Corsa 2010 Owner's Manual

8. Ensure that the bulb holder seal is
positioned as illustrated. Fit the
round seal on the fastening bolt.
9. Insert bulb housing in vehicle
body, and tighten securing nuts by
hand. Engage plug connector.
Close and lock cover.
After bulb replacement, check the tail
lights for proper functionality: switch
on the ignition, operate the brake,
switch on the side lights.

Side turn signal lights

Have bulbs replaced by a workshop.

Number plate light

1. Insert screwdriver in bulb
housing, press to the side and
release spring.
Vehicle care
2. Remove bulb housing
downwards, taking care not to pull
on the cable.
3. Lift flap and disconnect wiring
plug from bulb holder.
Back to overview
151