Opel Corsa 2010 Owner's Manual page 165

■ Never crawl under a jacked-up
vehicle.
■ Do not start the vehicle when it is
raised on the jack.
■ Before screwing in the wheel bolts,
clean them and lightly coat the
taper of each wheel bolt with
commercially available grease.
1. Pull off the wheel cover with the
hook. Vehicle tools 3 157.
For wheel covers with visible
wheel bolts: The cover can remain
on the wheel. Do not remove the
retaining rings on the wheel bolts.
Alloy wheels: Disengage wheel
bolt caps with a screwdriver and
remove. To protect the wheel,
place a soft cloth between the
screwdriver and the alloy wheel.
2. Install the wheel wrench ensuring
that it locates securely and
slacken each bolt by half a turn.
Vehicle care
3. Ensure the jack is positioned
correctly with the vehicle jacking
points.
With versions of the Corsa OPC
with sill panelling or retrofitted sill
panelling no jack must be used.
The vehicle may be damaged.
Back to overview
165