Opel Corsa 2010 Owner's Manual page 150

150 Vehicle care
2. Remove plug connector by
pressing on bulb holder tab.
3. Hold bulb housing from the
outside; unscrew two retaining
nuts.
4. Remove tail light assembly.
5. Gently press the three locking
lugs on the outside of the bulb
holder outwards and remove bulb
holder.
6. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb.
Reverse light (right side), rear fog
light (left side) (1)
Tail light (2)
Turn signal light (3)
Tail light/brake light (4)
Tail light (5)
7. Engage bulb holder in bulb
housing, ensuring that it properly
engages.
Back to overview