148
Vehicle care
2. Remove plug connector by
pressing on bulb holder tab.
3. Hold bulb housing from the
outside; unscrew two retaining
nuts.
4. Detach bulb housing towards the
rear.
5. Gently press the three locking
lugs on the outside of the bulb
holder outwards and remove bulb
holder.
6. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb.
Tail light (1)
Reverse light (2)
Turn signal light (3)
Tail light/brake light (4)
Rear fog light, may be only on one
side (5)
Back to overview