Exiting The User Setup Utility; Using The Help Window - Star Micronics LC-240C User Manual

30

Exiting the User Setup Utility

While in the User Setup Utility, select the Exit item from the menu bar.
Specify whether or not you want to send the settings to the printer by
clicking on the corresponding item on the screen. Or you can use the up and
down arrow keys to highlight the selection you want and then press Enter
to execute.

Using the Help window

While in the User Setup Utility, select Help from the menu bar.
Select the item you want help on from the list on the right side of the
screen. You can select an item either by clicking on it with the mouse or by
scrolling through the items with the keybord's up down arrow keys.
Exit Load Save General
Exit and send the settings to the printer
Exit and do not send the settings to the printer
= Scroll up = Scroll down
Exit Load Save General
Exit Exit
Load
You can leave the program here.
Save
You can decide on sending the currently
active data to the printer.
General
If you would like to use a special setting
Font
in future again, it may be useful to save
them with the save menu.
Paper
Adjustment
Port
About
= Scroll up = Scroll down
Font Paper Adjust.
= Enter
Font Paper Adjust.
TAB = Next help menu
Port Help
= Menu Select
Port Help
= Menu Select