Canon HF10 Instruction Manual page 100

Additional Information
[15] CANNOT RECORD CHECK THE CARD
- There is a problem with the memory card.
[3] CARD FULL
- The memory card is full. Erase some recordings to free some space or replace the memory card.
[4] CARD REACHED THE MAXIMUM NUMBER OF SCENES
- The memory card already contains the maximum number of scenes; no further scenes can be copied onto the
memory card. Delete some recordings (
[7] CARD UNABLE TO RECOGNIZE THE DATA
- The memory card contains scenes recorded in a different television system (NTSC).
[49] CHANGE THE BATTERY PACK
- Battery pack is exhausted. Replace or charge the battery pack (
[10] CHECK THE CARD
- Cannot access the memory card. Check the memory card and make sure it is inserted correctly (
- A memory card error occurred. The camcorder cannot record or display the image.
- If after the message disappears,
remove and reinsert the memory card. If
- Initialize the memory card (
[24] CONNECT THE COMPACT POWER ADAPTER
- When the camcorder is in
camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder.
[37] COULD NOT ADD TO PLAYLIST
- Scene could not be added to the playlist (
Delete some recordings (
[55] DATA INCLUDES FXP SCENES CANNOT COPY TO THIS CARD
- Movies recorded in FXP mode cannot be copied onto a memory card if it is rated Speed Class 2. Replace the
memory card with one rated Speed Class 4 or higher.
[11] ERROR WRITING THE CARD DATA MAY BE RECOVERED IF CARD WAS NOT REMOVED RECOVER FILES?
- If power supply was accidentally interrupted while the camcorder was writing to the memory card, this
message will appear the next time you turn on the camcorder. Select [YES] to try to recover the recordings. If
you removed the memory card and used it with another device after this happened, we recommend you
select [NO].
[54] INITIALIZE USING ONLY THE CAMCORDER
- There is a problem with the file system that prevents accessing the selected memory. Initialize the built-in
memory ( only) or memory card with this camcorder (
[18] MAY NOT BE POSSIBLE TO RECORD MOVIES ON THIS CARD
- You may not be able to record movies on a memory card without a Speed Class rating. Replace the memory
card with one rated Speed Class 2 or higher.
[51] NAMING ERROR
- The folder and file numbers have reached their maximum value. Set [IMG NUMBERS] to [RESET] (
erase all the images on the memory card or initialize it.
100
38, 59) to free some space.
appears in red, perform the following: Turn off the camcorder and
turns back to green you can resume recording/playback.
29). (Doing so will erase all the still images on the memory card.)
mode and is connected to the computer, this message will appear if the
52). You cannot add more than 999 scenes to the playlist.
38, 59).
17).
29).
28).
92) and