Canon HF10 Instruction Manual page 99

[23] CANNOT COPY
- The total size of the scenes you selected to copy exceeds the available space on the memory card. Delete
some recordings on the memory card (
[52] CANNOT EDIT
- Cannot move or delete original scenes or scenes in the playlist of the selected memory.
[53] CANNOT EDIT CHECK THE CARD
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder ( 29).
[33] CANNOT ENTER THE STANDBY MODE NOW
- The camcorder cannot enter the standby mode if the remaining battery charge is too low.
[25] CANNOT PLAY BACK
- There is a problem with the memory.
[27] CANNOT PLAY BACK CANNOT ACCESS THE BUILT-IN MEMORY
- There is a problem with the built-in memory.
[26] CANNOT PLAY BACK CHECK THE CARD
- There is a problem with the memory card.
[40] CANNOT PLAY THE MOVIES IN THE BUILT-IN MEMORY INITIALIZE USING ONLY THE CAMCORDER
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this
camcorder ( 29).
[21] CANNOT PLAY THE MOVIES ON THIS CARD
- Movies cannot be played back from a 64 MB or smaller memory card.
[22] CANNOT PLAY THE MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder ( 29).
[14] CANNOT RECORD
- There is a problem with the memory.
[44] CANNOT RECORD MOVIES IN THE BUILT-IN MEMORY
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this
camcorder ( 29).
[19] CANNOT RECORD MOVIES ON THIS CARD
- Movies cannot be recorded on a 64 MB or smaller memory card.
[20] CANNOT RECORD MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder ( 29).
[17] CANNOT RECORD ON THIS CARD USING FXP MODE
- Movies cannot be recorded in FXP mode on a memory card if it is rated Speed Class 2. Select a different
recording mode ( 31) or replace the memory card with one rated Speed Class 4 or higher.
[16] CANNOT RECORD CANNOT ACCESS THE BUILT-IN MEMORY
- There is a problem with the built-in memory.
38, 59) or reduce the number of scenes to copy ( 53).
99