Options; Display - Psion Teklogix Psion User Manual

Chapter 4: Configuring The netpad

Options

4.3.1 Options

Figure 4.2 Options Settings
4.3.1.1

Display

Scan Result
When this parameter is ON, the type of bar code and the result of the scan appear on
the netpad screen. Note that this information is only displayed after a successful
decode and only as long as the scanner trigger is pressed. When the trigger is
released, this information is cleared from the screen.
Scan Indicator
When this parameter is ON, the laser warning logo appears on the display whenever
the scanner is activated.
Scan Result Time (sec)
The value assigned to this parameter determines how long the scan results of a suc-
cessful scan are displayed on the terminal screen. Time is measured in seconds, and
a value of "0" (zero) disables the parameter.
Note: To remove the scan result from the screen before the Scan Result Time has
expired, perform an unsuccessful scan.
61
Psion Teklogix netpad Windows CE .NET 4.2 User Manual