Servers Menu Page - Psion Teklogix Psion User Manual

Chapter 7: Configuring Communications
netpad Bluetooth Settings
After the PIN has been validated, you will see an asterisk (*) in the PIN column in
the Devices list box, indicating that this device has a PIN set. Once a PIN is entered,
it is saved in the registry. To remove the PIN, press Set PIN, then <Enter>.
If the netpad tries to connect with a remote device for which no PIN has been set but
requires a PIN, and has Authentication enabled, you will be prompted to verify the
PIN. The Authentication Request dialogue will appear. Enter the PIN, press OK, and
the devices will be connected.
7.4.1.2

Servers Menu Page

The Bluetooth connection is initiated from your netpad to the remote device, there-
fore the netpad is called the 'client' and the remote is called the 'server'. The
Servers menu shows the server profiles that can be activated in your netpad. There is
currently one server profile available: Serial.
Place a checkmark in the checkbox to activate the server and it will show the associ-
ated port name beside the server name. The port name also follows the convention
under the Property menu (see "Section 7.4.1.3 Property Menu Page" on page 136).
135
Psion Teklogix netpad Windows CE .NET 4.2 User Manual