Kenmore 100.90002 Use And Care Manual page 5

ASSEMBLY cont.
Fig. 2 __
Fig, 2a I ........
4 On the Bowl Cover are the food chute, food chute lid, and movable loop, which serves
as a housing for the food pusher Nso included is the shaft containing the spring
mechanL, m that controis the slide button used to lock the food ehole lid into place
These are part of lhe Bowl Cover assembly
5 Place the Bowl Cover Assembty onto the Bowl, A_ign the arrow on Ihe Cover and the
unlock Icon on the Bow_(see F_g 2 and 2a) Turn the Cover counterclockwise towards
the senior front until it clicks
NOTE: There is only one position for the Bow! Cover to tuck onto Bowl The unit will not
operate If the Bowl Cover does not lock onto the Bowl, or if the Food Chute Lid does not
]alch onto lhe Food Chute
6 Make sure the loud chule lid is securely latched inlo place
7 To open the Food Chute Lid, pull the Slide ReJease Button out Llfl the Food Chute Lid
and Movable Loop (see Fig 3 and 3a) up and back to open
Fig° 3
8, When the food pusher is not being used to feed items down through the food chute,
it should be locked into place tn the movable loop This [s usually the case when using
blades down in the bowiinslead of discs at the top of the bowl,
When locked together, the _'oodpusher and movable Ioop can also act as one iarger food
pusher To lock the food pusher t'nlo the movable loop, siide the tab located on the food
pusher Into the slot on the rim of the movabte loop
5